In 2007 I purchased a Butterfly electric spinner (e-spinner) from Jerry Womack. Shortly after I took a several year hiatus from most of my fiber arts, including spinning. In 2012 I started knitting again and in 2013 resumed spinning. I got back out my Butterfly e-spinner but was not happy with the WooLee Winder that I had gotten with my e-spinner. I tend to spin very fine yarns, and the WooLee Winder pull in was too hard and erratic for these very delicate yarns. It works fantastically for plying, and I am sure it would be great for thicker yarns, say above lace or sock weight, but for extremely fine yarns from shorter fibers it would either not pull in or it would give sudden hard tugs at the ends of the bobbins where the direction turns. Neither of these is conducive to happy spinning.
Since a WooLee Winder is only one of several flyer options originally available for the Womack Butterfly e-spinner I tried to contact Jerry Womack for options only to find that all contact info I had for him no longer worked. I hope he and his wife are well, but my best guess is that they are no longer involved commercially in the fiber arts so I needed to figure out whether I could make changes to my e-spinner without assistance.
One of my regular spinning wheels is a Lendrum, for which I have all but the quill head, and several extra bobbins. I checked the length and it looked like I could use a regular Lendrum flyer on my Butterfly, if only I had the right bearings. So I took measurements and ordered a bearing for the front orifice. This bearing didn't seem to want to come off of the WooLee winder flyer that came with the Butterfly, so I didn't try to remove it. The rear bearing is smaller, but comes on and off easily. It has to be removed every time the bobbin is changed.
The new bearing and my regular Lendrum flyer fit just fine on the Butterfly spinner. There isn't any particular pulling like the WooLee Winder does when changing directions. The most difficult thing will be remembering to move the flyer hook as I'm not in the habit of doing that with the WooLee Winder!
Showing posts with label Butterfly Electric Spinner. Show all posts
Showing posts with label Butterfly Electric Spinner. Show all posts
Sunday, December 29, 2013
Monday, October 28, 2013
Bobbins Up!
As a spinner having more bobbins to hold yarn is important. To make a multiple ply yarn you usually need to have multiple bobbins. Even with a simple 2-ply yarn you need 2 bobbins of singles plus a third bobbin to ply onto. Bobbins for spinning are fairly expensive, so having a less expensive alternative for storage and to ply from is a nice option. This rewinding not only frees up your spinning bobbins for reuse, it also helps to equalize the twist through your singles which makes plying more even and thus more successful.
So I have been considering options for some sort of bobbin winder. These tools aren't cheap, but with the price of spinning wheel bobbins it doesn't take to many to make the bobbin winder a relatively inexpensive option. And storage bobbins are much less expensive than spinning wheel bobbins, making the long term cost much less.
When one is working on a large spinning project, say spinning a fleece, being able to store the singles until all the singles are spun can be a useful option. My personal preference is to keep track of the order bobbins of singles are spun then mixing the order when plying. So say you spun 6 bobbins of singles. I would then either spin the first and last, or first of the first half and first of the second half together. So numbering the bobbins in order by date of spinning, bobbin #1 would be plied with either 4 or 6. Bobbin 2 with 5, and bobbin 3 with either 6 or 4. This isn't a hard and fast rule, but since quite a lot of time can pass between my spinning sessions I prefer to average out differences in the way I spun the singles by mixing up the plying.
Some time ago I happened to learn of a product called Bobbins Up. It looked like a very nice idea, nice large storage bobbins that could be filled with the use of an electric drill or screwdriver. But I didn't order any at that point, figuring to do some more research before making a purchase.
Several months went by, then Spinzilla came along and I got to thinking more about bobbins. So I did some more research and thought that I would just get a winder through a local shop. Only due to Acts of Nature none were available for over a month. I decided to try to find the other bobbins, only I couldn't remember what they were called! Did some internet searches, but didn't see them. Finally found the right reference and ordered some.
I've been really pleased with these bobbins. I have weighed most of the ones I got and they were all between 30.15 and 30.19 grams, most were 30.18 grams. Since they are made of a recyclable plastic I just marked on the end with a Sharpie the weight of that particular bobbin so in future when I weigh them with yarn I'll be able to tell just how much the yarn itself weighs.
Each bobbin comes with its own bit that fits into your electric drill or screwdriver. You really only need one, but it is nice to be able to store each bobbin with its own bit so you always know you have everything you need.
Another really nice feature of these bobbins is that one end has a whorl. Having a whorl means that you can use your tensioned lazy kate when plying to keep it from back spinning. Ingenious.
My order arrived in 2 days. In fact, before the mail came that day I had sent an e-mail to the supplier asking for an estimated arrival time. I was sent a tracking number but the package had since arrived. I thanked them for the fast service and was told that if an order is placed before 3 PM ET it will usually be shipped out the same day.
Just in case you are wondering, no, I am not affiliated with this supplier in any way other than as a satisfied customer. So, if you are looking for a nice, affordable, option for storage bobbins, consider trying Bobbins Up! I don't think you'll be disappointed.
So I have been considering options for some sort of bobbin winder. These tools aren't cheap, but with the price of spinning wheel bobbins it doesn't take to many to make the bobbin winder a relatively inexpensive option. And storage bobbins are much less expensive than spinning wheel bobbins, making the long term cost much less.
When one is working on a large spinning project, say spinning a fleece, being able to store the singles until all the singles are spun can be a useful option. My personal preference is to keep track of the order bobbins of singles are spun then mixing the order when plying. So say you spun 6 bobbins of singles. I would then either spin the first and last, or first of the first half and first of the second half together. So numbering the bobbins in order by date of spinning, bobbin #1 would be plied with either 4 or 6. Bobbin 2 with 5, and bobbin 3 with either 6 or 4. This isn't a hard and fast rule, but since quite a lot of time can pass between my spinning sessions I prefer to average out differences in the way I spun the singles by mixing up the plying.
Some time ago I happened to learn of a product called Bobbins Up. It looked like a very nice idea, nice large storage bobbins that could be filled with the use of an electric drill or screwdriver. But I didn't order any at that point, figuring to do some more research before making a purchase.
Several months went by, then Spinzilla came along and I got to thinking more about bobbins. So I did some more research and thought that I would just get a winder through a local shop. Only due to Acts of Nature none were available for over a month. I decided to try to find the other bobbins, only I couldn't remember what they were called! Did some internet searches, but didn't see them. Finally found the right reference and ordered some.
I've been really pleased with these bobbins. I have weighed most of the ones I got and they were all between 30.15 and 30.19 grams, most were 30.18 grams. Since they are made of a recyclable plastic I just marked on the end with a Sharpie the weight of that particular bobbin so in future when I weigh them with yarn I'll be able to tell just how much the yarn itself weighs.
Each bobbin comes with its own bit that fits into your electric drill or screwdriver. You really only need one, but it is nice to be able to store each bobbin with its own bit so you always know you have everything you need.
Another really nice feature of these bobbins is that one end has a whorl. Having a whorl means that you can use your tensioned lazy kate when plying to keep it from back spinning. Ingenious.
My order arrived in 2 days. In fact, before the mail came that day I had sent an e-mail to the supplier asking for an estimated arrival time. I was sent a tracking number but the package had since arrived. I thanked them for the fast service and was told that if an order is placed before 3 PM ET it will usually be shipped out the same day.
Just in case you are wondering, no, I am not affiliated with this supplier in any way other than as a satisfied customer. So, if you are looking for a nice, affordable, option for storage bobbins, consider trying Bobbins Up! I don't think you'll be disappointed.
Wednesday, October 16, 2013
Final Spinzilla Results
Finished measuring the last of the Spinzilla singles yesterday. Here's my final submission photo. I tried to insert that as an image, but it wouldn't accept it. Weird. In all I spun 3217 yards in a week.
I've got a bobbin winder on order, which I'm waiting to come in so I can put some of these yarns back onto bobbins ready for plying.
I've got a bobbin winder on order, which I'm waiting to come in so I can put some of these yarns back onto bobbins ready for plying.
Monday, October 14, 2013
Spinzilla!
The first full week of October is Spinning and Weaving Week. So this year there was a contest called Spinzilla. I joined Team Stringtopia (#teamstringtopia) spinning up a number of different fibers during the 7 days the contest ran. Each team can have up to 25 people, and the Spinzilla pages explain about all the details.
As someone for whom spinning is a relaxation, a way to relax and enjoy fiber going through my hands to become yarn, enjoy the process as much or sometimes more than the end result, the production spinning for yardage was a bit of a jolt. However, I put aside all my knitting projects and spun as much as I was able. Now mind, I work full time outside the home, we have a multi-pet household and I take some classes of an evening, so the amount of time I had to spin was limited.
Knowing myself it was important to have multiple projects to work on during the week so I selected a number of different fibers. Some were single batts, some larger amounts. Prior to the beginning of the week I cleared my spinning equipment of yarn so I could start from empty bobbins/spindles, making it easy to keep track of just what I did during the week.
I have 2 spinning wheels, a double treadle Lendrum, and a Mazurka, and a Butterfly Electric Spinner. The Butterfly I have been spinning up some bouncy carded dark grey wool, so using an empty bobbin I spun more of this. As of noon on Sunday I had spun 732 yards of this wool. The Mazurka I spun some light grey CVM cross batts. I had recarded the wool the week before so it would be soft, fluffy and easy to spin. And it was. I ended up spinning 901 yards of this.
The Lendrum I used for all the other bits of fiber that took my fancy. In September I took a class at Stringtopia called Color Blending on Drum Carder. We made a number of interesting blends as well as batt structures like layered batts and taking a roving off through a diz. Several of these were spun up as part of my Spinzilla spinning. I found it very helpful to be able to switch around to different projects either as my eyes got tired or I just needed to do something different for a while. All in all I spun over 1168 yards of singles on the Lendrum.
In addition to all this wheel/electric spinner spinning I also took a carbon fiber micro trindle spindle and bison down fiber with me when I carpooled to work. Over 4 days of commuting I spun 3.15 grams onto one spindle then 6.63 on another. The 3.15 grams yielded just over 61 yards of yarn.
I still have to measure how many yards are in the 6.63 grams of bison fiber and how many yards I spun on the electric spinner last evening. However, as of this writing I measured over 2800 yards of singles spun over last week. In addition to the measuring of yardage I also need to get a photo taken of what I have spun.
As someone for whom spinning is a relaxation, a way to relax and enjoy fiber going through my hands to become yarn, enjoy the process as much or sometimes more than the end result, the production spinning for yardage was a bit of a jolt. However, I put aside all my knitting projects and spun as much as I was able. Now mind, I work full time outside the home, we have a multi-pet household and I take some classes of an evening, so the amount of time I had to spin was limited.
Knowing myself it was important to have multiple projects to work on during the week so I selected a number of different fibers. Some were single batts, some larger amounts. Prior to the beginning of the week I cleared my spinning equipment of yarn so I could start from empty bobbins/spindles, making it easy to keep track of just what I did during the week.
I have 2 spinning wheels, a double treadle Lendrum, and a Mazurka, and a Butterfly Electric Spinner. The Butterfly I have been spinning up some bouncy carded dark grey wool, so using an empty bobbin I spun more of this. As of noon on Sunday I had spun 732 yards of this wool. The Mazurka I spun some light grey CVM cross batts. I had recarded the wool the week before so it would be soft, fluffy and easy to spin. And it was. I ended up spinning 901 yards of this.
The Lendrum I used for all the other bits of fiber that took my fancy. In September I took a class at Stringtopia called Color Blending on Drum Carder. We made a number of interesting blends as well as batt structures like layered batts and taking a roving off through a diz. Several of these were spun up as part of my Spinzilla spinning. I found it very helpful to be able to switch around to different projects either as my eyes got tired or I just needed to do something different for a while. All in all I spun over 1168 yards of singles on the Lendrum.
In addition to all this wheel/electric spinner spinning I also took a carbon fiber micro trindle spindle and bison down fiber with me when I carpooled to work. Over 4 days of commuting I spun 3.15 grams onto one spindle then 6.63 on another. The 3.15 grams yielded just over 61 yards of yarn.
I still have to measure how many yards are in the 6.63 grams of bison fiber and how many yards I spun on the electric spinner last evening. However, as of this writing I measured over 2800 yards of singles spun over last week. In addition to the measuring of yardage I also need to get a photo taken of what I have spun.
Tuesday, July 09, 2013
Tour de Fleece 2013 and other fibery things
I've been a member of Ravelry since February, 2008 but haven't used it extensively until this year. Oh I'd added some of my books to the library area, put a few yarns into the stash and made some projects. I even took some photos of my work and yarns and attached them in the appropriate places. But I didn't use it extensively. Then for various reasons I put my fiber stuff on the back burner for a few years. I missed it, but was so busy with other things that there just wasn't time to do much about it.
Then in December 2012 my older son graduated from Marine boot camp at Parris Island, SC. There were several days of family activities before Graduation Day, as well as a very long trip there and back. Lots of time to knit and not lots of other things that had to be done! So I dug into my languishing WIP's (Works in Progress) and found a pair of socks that were a few inches long with lots yet to do and some pretty purple yarn that I decided would become a hat. I had a book with an interesting construction for a hat, so that's what I took. I made a small version of the hat to better understand the construction, then made a full sized one. I finished the hat on that trip except for the I-cord strings, which I finished shortly thereafter.
In the process I reaffirmed how much I love knitting and the fiber arts. I kept knitting, on the way to and from work, in meetings, on conference calls, while walking the dogs, whenever I had a few minutes with nothing else that had to be done, and whenever I could multitask and do it. Finished the knee socks. Knit garters for knee socks. Made another pair of knee socks. Started another pair. Got sidetracked by shawlettes, a shorter, crescent shaped shoulder shawl. Made 2 of these in very different yarns using the pattern English Ivy. I now keep them at the office as a bit of extra warmth in the A/C.
Right after Easter my new local fiber studio, Stringtopia, had a 'seasonal activity' where we dyed some tussah silk using Easter egg dyes. I started to spin up one of the 2 lengths on a trindle, thinking to make a reasonably softly spun 2-ply. Then a little at a time I started to get back out more of my spinning equipment, first my Mazurka wheel then the Lendrum. The Lendrum needed new drive bands and treadle connectors, so those got replaced.
Then along comes the end of June and there is talk on Ravelry about Tour de Fleece. The basic premise is to spin every day that the racers in the Tour de France race. I decided this was a good way to help me focus on spinning some every day. I'm posting photos here on Flickr.
Then in December 2012 my older son graduated from Marine boot camp at Parris Island, SC. There were several days of family activities before Graduation Day, as well as a very long trip there and back. Lots of time to knit and not lots of other things that had to be done! So I dug into my languishing WIP's (Works in Progress) and found a pair of socks that were a few inches long with lots yet to do and some pretty purple yarn that I decided would become a hat. I had a book with an interesting construction for a hat, so that's what I took. I made a small version of the hat to better understand the construction, then made a full sized one. I finished the hat on that trip except for the I-cord strings, which I finished shortly thereafter.
In the process I reaffirmed how much I love knitting and the fiber arts. I kept knitting, on the way to and from work, in meetings, on conference calls, while walking the dogs, whenever I had a few minutes with nothing else that had to be done, and whenever I could multitask and do it. Finished the knee socks. Knit garters for knee socks. Made another pair of knee socks. Started another pair. Got sidetracked by shawlettes, a shorter, crescent shaped shoulder shawl. Made 2 of these in very different yarns using the pattern English Ivy. I now keep them at the office as a bit of extra warmth in the A/C.
Right after Easter my new local fiber studio, Stringtopia, had a 'seasonal activity' where we dyed some tussah silk using Easter egg dyes. I started to spin up one of the 2 lengths on a trindle, thinking to make a reasonably softly spun 2-ply. Then a little at a time I started to get back out more of my spinning equipment, first my Mazurka wheel then the Lendrum. The Lendrum needed new drive bands and treadle connectors, so those got replaced.
Then along comes the end of June and there is talk on Ravelry about Tour de Fleece. The basic premise is to spin every day that the racers in the Tour de France race. I decided this was a good way to help me focus on spinning some every day. I'm posting photos here on Flickr.
Tuesday, December 09, 2008
Spinning and Snow
We had snow blowing around all day Saturday so except for an excursion to walk the dogs we stayed home. I decided to take a break from spinning Spudnick's fleece and got out my Butterfly Electric Spinner build by Jerry Womak, and some fiber that I've had for much longer than the spinner that ironically was from his wife Jean, a lovely hand dyed blend called Purple Passion. Beautiful stuff. More information about both the spinner and fiber is on the Wild Meadow Angora web site.
Wonderful way to watch a snowy day, spinning luscious fibers!
Wonderful way to watch a snowy day, spinning luscious fibers!
Subscribe to:
Posts (Atom)